![]() If the driver was registered with DKMS, this wouldn't be necessary. The driver needs recompiling on each update.Įvery time there is a new kernel update, you will need to execute make clean in the directory and repeat steps 3-4 The device will be ready to go after a reboot, so this only needs to be done once. If everything is successful, it's time to activate it. Tip: Add -j4 to the end of make to use all 4 cores of the CPU. You can probably pick one up for less than 25 new and less for used but tested and working, Search by the HP part number, not the model of the wifi card. Either card is readily available on Amazon or eBay and have W10 driver support. Download Ralink 802.11n USB Wireless Driver. Proceed to make the driver, then install it to the system. Intel Dual Band Wireless-N 7260AN 802.11 a/b/g/n 2x2 WiFi + BT4.0 HP part 717381-001. Ralink 802.11n USB Wireless Driver Windows 10 - Ralink drivers are specialized for single networking controller. Navigate somewhere and then clone the repository: mkdir Drivers These instructions may no longer be necessary in future versions, as the README states deprecation and is now part of the 4.2 kernel, although it still doesn't work out of the box with Ubuntu 15.10 (running Linux kernel 4.2)įirst, you will need a temporary internet connection to download and install some essential packages: sudo apt-get install git make build-essential ![]() If you've got the same adapter (or chipset inside), follow these instructions to get the device working. ![]() Bus 008 Device 002: ID 148f:7601 Ralink Technology, Corp. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |